Reducer – Fitting Body to Tube

Infinity Body Reducer Fitting (Spigot Reducer)

The Streamlined Solution for Pipe Size Transitions

Efficiently step down your air line diameter without the bulk or expense of large coupling assemblies. The Infinity Body Reducer (also known as a “Spigot Reducer”) is a compact, plug-in fitting designed to connect a larger Infinity Aluminum Pipe fitting directly to a smaller pipe size.

Unlike standard reducing couplers that require two separate connections, the Body Reducer features a “stem” or “spigot” on one side that mimics the pipe itself. This stem pushes directly into a larger fitting (like a Tee or Elbow), instantly converting that port to accept a smaller tube. This design is perfect for creating branch lines, reducing drop legs, or stepping down main headers with minimal parts.

Key Features & Benefits

• Compact & Space-Saving: By inserting directly into another fitting, the Body Reducer eliminates the need for short “jumper” pipes or bulky threaded reducing bushings. This keeps your piping layout tight, clean, and professional.
• Cost-Effective Reduction: Why buy a specialized “Reducing Tee” when you can use a standard Equal Tee and a Body Reducer? This modular approach simplifies your inventory and often lowers the total material cost of a project.
• Instant “Push-to-Connect” Seal:
  • Large Side (Spigot): Pushes directly into any standard Infinity fitting (Elbow, Tee, Union) of the larger size.
  • Small Side (Socket): Accepts the smaller Infinity pipe with the same secure, leak-free grab ring technology used throughout the system.
• Full-Flow Design: Engineered with a smooth internal taper to minimize turbulence. Air flows seamlessly from the large diameter to the small diameter without the sharp “steps” that cause pressure drop in threaded iron reducers.
• Versatile Configurations: Turn a 50mm Elbow into a 50mm-to-40mm reducer, or convert a 63mm Tee into a manifold with 32mm drops. The combinations are nearly endless.

Technical Specifications

• Configuration: Stem/Spigot (Large OD) x Push-to-Connect Socket (Small OD)
• Material:
  • 20mm – 63mm: Nickel-Plated Brass or Technopolymer (depending on specific series)
  • 80mm+: Aluminum Alloy
• Pressure Rating: Up to 232 PSI (16 Bar)
• Temperature Range: -4°F to +176°F (-20°C to +80°C)
• Application: Reducing pipe diameter at a fitting junction (e.g., Tee, Elbow, Union).

Installation Tip

To use this fitting:

1. Insert the stem end of the Reducer into a standard Infinity fitting (like a 50mm Tee).
2. Push your smaller pipe (like 40mm tube) into the socket end of the Reducer.
3. You now have a secure, leak-free reduction without cutting extra pipe.

Simplify your layout and save money on fittings. Use the Infinity Body Reducer for fast, efficient size transitions.